Solar AC Modules: Adopting tomorrows Technology today
By Sunil Rathi, Director - Sales & Marketing, Waaree Energies Ltd.
The solar PV technology around the world has seen continuous improvement in module efficiency, development of new and smart modules, varying configurations of solar cell. Out of all these improvements, the introduction of Alternating Current (AC) modules has been exhilarating. The AC modules (also known as “Plug and Play” module) as the name suggest directly produces grid compatible AC output. This is possible due to an extra device known as micro-inverter which is (now mostly) integrated with the junction boxes (present in the primitive PV modules). This micro inverter is connected individually to each module performing two important functions namely:
a.Maximum Power Point Tracking (MPPT) of the solar module
b.Conversion of the Direct Current (DC) power to grid compatible AC power
These individual modules are connected to each other to form an AC branch circuit which is further connected to the load/main supply panel or the generated energy is directly exported to the grid. The primary advantages of using AC modules are mentioned as below:
•Improved String Level Performance:As mentioned above, these micro inverters have in-built MPPT tracker. This enables them to extract the maximum power from the solar panel. Such feature helps when there is a partial shading (say due to cloud cover) in the power-plant. This partial shading in usual case would drag down the power output of entire string. In case of AC modules, the partial shading would affect only a single module
•Easy Monitoring and Failure Detection:The latest micro inverters come with in-built communication system. Such devices are perfect match to monitor module level power output and failure detection. Any defect in the plant can be traced down to module level and can be rectified within short span of time giving ease to operation and maintenance of power plant.
•Ease of Increasing the Plant Size:The size of power plant which uses DC modules is (mostly) fixed due to inverter capacity. This means that expansion of such power plant may not always be possible. However, the plant using AC modules could initially have only a limited number of modules which can always be increased as and when required. As the AC modules produce grid compatible power, the customer does not need to worry about module mismatch.
Reduced Installation Time:The AC module forgoes the DC side cabling (and combining output via combiner box) until the inverter. This reduces the time required to set up the entire plant. Additionally the output from the AC modules can be directly (with added protection device) fed into the AC panel of the customer. This significantly reduces the number of components and amount of time required to install such components.
Such modules are of important while deployed on field primarily for the rooftop owners. For rooftop plants (while comparing to a utility scale plant) size and shadow free area availability is always constrain. This may (sometimes) lead to mismatch between the module and the inverter. Additionally future erections of property around the rooftop plant may lead to shadows being casted on the existing power plant. AC modules may offer simple yet tailor made solutions to all such plants where any future expansion or contraction in size of power plants is required. Adding or removing the modules (where required/not required) would not have any effect on the plant performance or its output characteristics.
While AC modules and micro inverters were present in the market for quite a long time, their market penetration is poised to increase in years to come. One of the reasons which may be attributed to such increase is the increased awareness of rooftop and utilizing AC modules at the rooftop. Additionally, there has been huge advancement in micro inverter in terms of both its efficiency and power output. This has given a much needed push to AC modules while enabling the top module manufacturers to add it to their product basket. It is expected that the market of AC modules worldwide would grow to more than US$550 million by 2020 from around US$150 million in 2017.